-13%

Fanco Centrifugal VKM Inline Fan 200mm with Lead & Plug

Fanco Centrifugal VKM Inline Fan 200mm with Lead & Plug

Fanco Centrifugal VKM Inline Fan 200mm with Lead & Plug

$364.00

In stock

$364.00

The Fanco VKM 200 is a quality centrifugal inline fan that may be used for exhaust, air transfer and other applications. It is a centrifugal design which means the fan moves good air volumes against high pressure. View technical details below. This fan plugs into an existing power point. If you are purchasing accessories, please check to see if they need to be installed by an electrician.

View cart

Description

VKM Features Overview:

Capacity 1100 m3/hr
Noise 51 dB(A)
Wattage 193w
Ductable Yes – 200mm diameter

The Fanco VKM range is a style of fan that can be used with long lengths of duct. Please refer to the performance curves for more information. The fan is available in 6 sizes and comes with a high quality, long life motor that is continuously rated. the casing is metal and this listing also includes mounting brackets, meaning thew fan can be installed at any angle.

VKM Range Features:

  • Steel casing provides reliable operation in case of outdoor installation.
  • Overheating protection with automatic restart.
  • Ball bearing motor for long service life designed for at least 40 000 hours.
  • For precise features, safe operation and low noise, each turbine is dynamically balanced.
  • Motor protection rating IPX4.

The fan has a single speed motor but can be used in conjunction with a variable speed controller if you wish to manipulate the speed (see accessories below). This product would need to be wired to the fan by an electrician.

This fan comes with a lead and plug attached – therefore simply plugs into a power point. An electrician is not required to perform installation. However, please be aware that you will require an electrician if you choose to use this fan in conjunction with hardwired accessories, including but not limited to speed controllers. The lead attached to the fan is 1m in length.

Important Notice: A member of our technical team will install the lead and plug to the fan. Please be aware we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.

Additional information

Brand

Fanco

Colour

Blue

Installation

Includes Lead & Plug, Accessories May Require Hardwiring

Warranty

The Manufacturer offers a 2 year replacement warranty (conditions apply)

Motor Type

Centrifugal

Manufacturers Part Number

EXVUV200 – EALEAD

BarCode Number :

All data is provided the manufacturer. Capacity figures are based on the extraction rate of the unit in 'freeflow'. This means without any ducting, vents or other components. As you add ducting to a fan it will impact the extraction rate as this introduces resistance. For this reason if you are ducting an extraction fan it is best to keen the run as short, tight and direct as possible. For more information please view our exhaust fan buying guide.

For comprehensive warranty information relating to this product please visit the manufacturers website.

1 review for Fanco Centrifugal VKM Inline Fan 200mm with Lead & Plug

  1. 5 out of 5

    Mike

    Excellent to deal with, no problems at all.


Only logged in customers who have purchased this product may leave a review.