AE3+ Aeratron Ceiling Fan With Remote - DC Silver 50"
The Aeratron ceiling fan AE3+ is one of the most energy efficient fans on the market today. The AE3+ model features a three blade design and includes a 6 speed remote control for easy operation. The Aeratron ceiling fan features an energy efficient DC motor while its smooth aerofoil ABS blades make for durable and steady air circulation coupled with a silent operation. The Aeratron would complement many indoor living areas.
Aeratron Features Overview:
| Location: | Indoor |
| Colour: | Silver Motor & Silver Blades |
| Blade Material: | Plastic |
| Blade Span: | 50" (126cm) |
| Motor Type: | Energy Saving DC Motor |
| Operation: | Remote Control |
| Summer/Winter Use: | Reversible From Remote |
| Ceiling to Blade Drop: | 275mm |
| Angled Ceilings? | Purchase relevant kit - see Description |
| Light: | Light adaptable - see accessories |
This Aeratron ceiling fan model is light adaptable.
Raked / High Ceiling Installation
If you have a flat, high ceiling and simply wish to extend the drop of the fan then you would just need to purchase the Aeratron Extension Rod Raked Ceiling Kit (0° - 15°) Suits FR / AE+ Models. (see below)
If you have a raked ceiling between 0°-15° degrees: You will need the Aeratron Extension Rod Raked Ceiling Kit (0° - 15°) Suits FR / AE+ Models (see below)
If you have a raked ceiling between 16° degrees and 33 degrees: You will need the Aeratron Raked Extension Rod Ceiling Kit (16° - 33°) Suits FR / AE+ Models (see below)
Please note this ceiling fan is suitable for INDOOR installation ONLY. If installed in an outdoor location, your Aeratron ceiling fan will not be covered by the manufacturer warranty.
| Speed | Airflow m3/hr | Wattage | RPM |
| 1 | 2,448 | 4.4 | 55 |
| 3 | 5061 | 7.6 | 105 |
| 6 | 7,805 | 17.7 | 165 |
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
| Model Number | PL350SLV |
|---|---|
| Motor Type | DC |
| Brand | Aeratron |
| Style | Modern, Architectural / Designer |
| Location | Indoor |
| Blade Span (Size) | 50" (127cm) |
| Motor Colour | Silver |
| Blade Colour | Silver |
| Blade Material | Plastic |
| IP Rating | No IP Rating Specified |
| Light Kit | Light Adaptable |
| Blade Pitch | To be Confirmed |
| Drop (Ceiling to Blade) | 275mm |
| Number of Blades | 3 |
| Airflow (Max) | 7,805 m3/hr |
| RPM (High) | 165 |
| RPM (Low) | 55 |
| Motor (max) | 17.7W |
| Reversible (Summer/Winter) | Reversible From Remote |
| Speeds | 6 speeds |
| Voltage | 240V - Standard |
| Warranty Details | Aeratron: This fan comes complete with a 3 year Manufacturer's warranty on the motor and other main parts. A 1 year warranty is provided for the receiver and remote control. Valid for Australia installations only. Conditions apply. |
| Warranty Disclaimer | 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
| Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
| Notice / Disclaimer | Aeratron: it is highly recommend to install a maximum of 8 fan units per power circuit, and highly recommend to add an on/off switch to each fan. This will allow extra energy savings and easier servicing if required. |
