Martec Scorpion DC Ceiling Fan with LED Light & Remote – White 52″
$399.00
The Martec Scorpion DC ceiling fan with LED light is a high airflow fan with a 5 speed remote. With a sleek design and strong capability, the Scorpion will make a welcome addition to living rooms in Summer. The remote makes the most of DC technology with the added functionality of timer and reverse controls. The remote also controls the 3 step dimming function on the LED light, while a switch on the LED panel sets the colour temperature.
Suitable Accessories…
- Description
- Additional information
- Reviews (1)
Description
Key Features:
Install Location: | Indoor |
Blade Material: | ABS Plastic |
Blade Span: | 52″ (132cm) |
Motor Type: | DC Motor |
Operation: | Remote Control |
Summer/Winter Use: | Reversible From Motor |
Ceiling to Blade Drop: | 310 mm |
Angled Ceilings? | Suitable up to 12 degrees |
Light: | Integrated LED Light |
Other Details:
- Sleek modern design
- Available in three attractive colour finishes: White, Matte Black and Brushed Nickel
- Remote also has timer function which allows you to keep the fan running for up to 8 hours.
- Drop from ceiling to base of light is approx 390mm
Performance Data:
SPEED | RPMS | WATTS | AIRFLOW |
1 | TBC | 5.2w | |
2 | TBC | 9.8w | |
3 | TBC | 16.3w | |
4 | TBC | 23w | |
5 | TBC | 36w | 13,286 m3/hr |
Performance Summary:
- The Scorpion uses very little energy to produce a high airflow, making it extremeley energy efficient
- Higher airflow than some ceiling fans with a similar design and size
- Airflow on top speed is suitable for living areas and other communal spaces.
Light Information
Fitting | Integrated LED Light Kit |
Wattage | 20w |
Colour Temperature | CCT |
Brightness (Lumens) | TBC |
Dimmable? | Yes |
Understanding the LED light
- Set the light to your choice of colour temperature using a switch on the LED panel
- This light has 3 step dimming, controlled by the remote.
- Light will always switch on to full brightness.
- To dim the light to 50% of its maximum brightness, click the light button twice within1 second. Double clicking the light button again will reduce the brightness to approx 15%.
Additional information
Brand | Martec |
---|---|
Warranty Details | Martec – 3 year in home warranty + additional 3 year motor replacement. Terms & Conditions apply – visit manufacturers website for more info |
Location | Indoor |
Manufacturers Part Number | MSF1333WR |
Installation Location | Indoor |
Overall Diameter | 132cm (52") |
Control | Remote Control |
Motor Type | DC |
Blade Material | Plastic |
Motor Colour | White |
Blade Colour | White |
BarCode Number : 9312375903048
Ceiling Fan Installation Disclaimer
1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician’s certificate of installation in a safe place.
2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs.
Ceiling Fan Warranty Disclaimer
1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty – this proof will need to be in the form of an invoice or receipt detailing the name and licence.
2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed.
3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions.
4. For comprehensive warranty information + terms and conditions please visit the manufacturers website.
1 review for Martec Scorpion DC Ceiling Fan with LED Light & Remote – White 52″
Only logged in customers who have purchased this product may leave a review.
Paula –
Looks great, good price, not installed yet