Details
The Martec Profile Plus 2 Exhaust Fanis a high extraction 3 in 1 bathroom heater and exhaust fan. The Martec Profile Plus LED incorporates a sleek modern design with the latest lighting technology. Featuring instant heat and 1890 lumens from the advanced energy efficient LED lamp fittings (Warm White).
Profile Plus 2 Features
This product comes with a 3 gang switch, meaning the light, heat and exhaust functions can be switched on independently. Consequently this product needs to be installed by a qualified electrician.
Additional Information
| Model Number | MBHP2LW |
|---|---|
| Application | Domestic |
| Brand | Martec |
| Colour | White |
| Shape | Square |
| Installation Location | Ceiling |
| Installation | Requires Hardwiring (electrician required) |
| Hole Size | 435mm x 255mm |
| Capacity (m3/hr) | 460 m3/hr |
| Rec Room Size (m3) | 30 |
| Noise dB(A) | 55 |
| Power (Watts) | 45 |
| Ductable | Yes |
| Duct Size | 125mm |
| Built in Draft Stopper | Yes |
| Warranty | The Manufacturer offers a 3 year replacement warranty (conditions apply) |
| Dimensions | CUT OUT SIZE: 435mm x 255mm GRILL SIZE: 480mm x 300mm Minimum ceiling depth of 210mm is required |
| Disclaimer | *"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician. |
The products listed below are compatible accessories for this item:
Write Your Own Review
Accessories
Martec LCD Remote Kit To Suit 3 in 1 Heater Range
$90.50
|
Duct Tape 1x Roll
$5.00
|
