Malibu IP55 Ceiling Fan With Wall Control - Titanium 52"
The Ventair Malibu Ceiling fan with wall control is designed with four ABS plastic blades providing superior balanced performance. This fan provides high air movement reaching 13,720 m3/hr, quality bearings are used for the motor for a lengthy running life, reaching 100W and includes a three speed wall control. The Malibu is also remote control adaptable and has a reversible airflow option to remain suitable for use in both summer and winter seasons. The Malibu Ceiling fan is pre-balanced for smoother and quieter operation.
Malibu Features Overview:
| Location: | Indoor/ Coastal/Outdoor (Undercover) |
| Colour: | Titanium Motor & Blades |
| Blade Material: | ABS Plastic |
| Blade Span: | 52" (132cm) |
| Motor Type: | AC |
| Operation: | Wall Control |
| Summer/Winter Use: | Reversible from Motor |
| Ceiling to Blade Drop: | 355mm |
| Angled Ceilings? | Suitable up to 18 degrees |
| Light: | No Light Option |
The Malibu Ceiling fan is a new generation outdoor ceiling fan from Ventair. It has an IP55 water protection rating and is designed for use in not only indoor locations but is suitable for outdoor and coastal locations as well. The design consists of four ABS plastic blades and a premium long life motor which utilises ball bearings.
| Model Number | MAL1404TI |
|---|---|
| Motor Type | AC |
| Brand | Ventair |
| Style | Modern |
| Location | Indoor, Outdoor - Damp Location (undercover), Outdoor - Wet Location, Outdoor - Coastal Location (limited) |
| Blade Span (Size) | 52" (132cm) |
| Motor Colour | Titanium |
| Blade Colour | No |
| Blade Colour (Reverse) | No |
| Blade Material | Plastic |
| IP Rating | IP55 |
| Light Kit | No |
| Globe Fitting | No |
| Blade Pitch | To be Confirmed |
| Drop (Ceiling to Blade) | 355mm |
| Number of Blades | 4 |
| Airflow (Max) | 13,720m³h |
| RPM (High) | 255 |
| RPM (Low) | 104 |
| Motor (max) | 100w |
| Reversible (Summer/Winter) | Reversible From Motor |
| Speeds | 3 speeds |
| Voltage | 240V - Standard |
| Suitability for Raked Ceilings | Suitable up to 18° |
| Warranty Details | Ventair: This fan comes complete with a 2 year Manufacturer’s in-home warranty and a further 4 year replacement warranty on the fan motor. Conditions apply - see www.ventair.com.au/warranty for more information. |
| Warranty Disclaimer | 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
| Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
| Notice / Disclaimer | If you have any questions - please contact us. |
