Outdoor Elements II Ceiling Fan - Weathered Brick 52"
The Hunter Outdoor Elements ceiling fan is a beautiful outdoor fan that is tropically inspired. The Outdoor Elements comes in a 52” (132cm) size and is durable to withstand the elements with its all-weather blades and IP44 rating. Featuring 5 Solid Teak Blades and a Weathered Brick motor. This fan is light adaptable and comes with a pull control as standard however a wall control can be purchased separately for easy operation. Please note: There are no Weathered Brick extension rods available, however the New Bronze rods are an extremely close match for this fan. See the listed accessories below for more information.
Outdoor Elements Features Overview:
|Location:||Indoor / Outdoor (Undercover)|
|Colour:||Weathered Brick Motor & Solid Teak Blades|
|Blade Span:||54" (137cm)|
|Summer/Winter Use:||Reversible From Motor|
|Ceiling to Blade Drop:||290mm (approx)|
|Angled Ceilings?||Suitable up to 34 degrees|
|Light:||Light adaptable - see accessories|
The Outdoor Elements II offers switch (reversible) blades so you have the flexibility to select a favourable finish to complement your interior whether you want a palm design or wicker look.
*This fan will hold up well in outdoor locations, however it is not immune and over time may show signs of succumbing to the elements. The Outdoor Elements ceiling fan features a rust proof aluminium construction with stainless steel hardware and UV resistant ABS plastic all-weather blades which help withstand some elemental conditions. It is IP44 rated meaning it is protected from water splashing from all directions.
If installation is in a covered outdoor area, the fan should be placed at least 1.5 metres from the edge of the roof or eaves of the enclosure. This will keep the fan away from direct rain, water and sunlight, as well as indirect water splashing which may cause damage to or expedite deterioration of the fan motor and exteriors. If wanting a light for outdoor installations, only the Hunter Outdoor Light Kit is suitable.
|Location||Indoor, Outdoor - Damp Location (undercover), Outdoor - Wet Location|
|Blade Span (Size)||52" (132cm)|
|Motor Colour||Weathered Brick|
|Blade Colour (Reverse)||Teak|
|Light Kit||Light Adaptable|
|Drop (Ceiling to Blade)||290mm (approx)|
|Number of Blades||5|
|Reversible (Summer/Winter)||Reversible From Motor|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable up to 34°*|
|Warranty Details||Hunter: This fan comes complete with a 12 month Manufacturer's in-home warranty for defects. All motors come with a limited lifetime warranty. Conditions apply - see www.hunterfans.com.au/hunter-warranty for more information.|
|Warranty Disclaimer||1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|