Fanco Mixflow TT Silent Inline Fan 200mm with 3 Position Switch, Lead & Plug
CUSTOMER NOTICE: This fan is available to purchase on PRE-ORDER. ETA Early October. Any orders placed will be dispatched when in stock.
The Fanco TT Silent 200 has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 810m3/hr, the higher setting has an output capacity of 1020m3/hr. The fan has been specifically engineered to operate very quietly.
TT Silent Features Overview:
|Capacity||1020 m3/hr (810 on low)|
|Noise:||36 dB(A) (31 on low)|
|Wattage:||110 w (78 on low)|
|Ductable:||Yes (200mm duct)|
The Fanco TT Silent range is a high quality range of mixflow inline fans. Typically these fans are used for exhaust applications. If you wish to switch between the high and low speed you can do so via the inbuilt 3 position switch. See accessories below for other components designed to be used in conjunction with the fan.
TT Silent Inline Fan Features:
- The external casing is made of polymer-coated steel.
- The inner casing perforation let sound waves pass through the holes and fall at a specific angle to the sound-absorbing layer. The casing is internally heat and the sound-insulated with 50 mm mineral wool layer.
- The specially perforated casing and sound-absorbing material provide sound attenuation in a broad frequency band. The inner casing and the impeller are made of high-quality durable plastic.
This fan comes with a lead and plug attached - therefore simply plugs into a powerpoint. An electrician is not required to perform installation. The lead attached to the fan is 1m in length. However, please be aware that if you are purchasing hardwired accessories, you will need an electrician to install those.
|Model Number||EXVUTTS200 - EALEAD|
|Installation||Includes Lead & Plug|
|Capacity (l/s)||283 l/s|
|Capacity (m3/hr)||1020 m3/hr|
|Rec Room Size (m3)||69|
|Built in Draft Stopper||No|
|Warranty||The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Disclaimer||*'Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|