Fanco Mixflow TT Silent Inline Fan 150mm with 3 Position Switch, Lead & Plug
The Fanco TT Silent 150 has two speeds available via the inbuilt 3 position switch. The lower setting has an output capacity of 405m3/hr, the higher setting has an output capacity of 555m3/hr. The fan has been specifically engineered to operate very quietly.
TT Silent Features Overview:
|Capacity||555 m3/hr (405 on low)|
|Noise:||33 dB(A) (26 on low)|
|Wattage:||52 w (45 on low)|
|Ductable:||Yes (150mm duct)|
The Fanco TT Silent range is a high quality range of mixflow inline fans. Typically these fans are used for exhaust applications. If you wish to switch between the high and low speed you can do so via the inbuilt 3 position switch. If you wish to switch between speeds remotely - without having to go the fans inbuilt position switch will need to purchase an additional speed controller. See accessories below for the controller and other components designed to be used in conjunction with the fan.
TT Silent Inline Fan Features:
- The external casing is made of polymer-coated steel.
- The inner casing perforation let sound waves pass through the holes and fall at a specific angle to the sound-absorbing layer. The casing is internally heat and the sound-insulated with 50 mm mineral wool layer.
- The specially perforated casing and sound-absorbing material provide sound attenuation in a broad frequency band. The inner casing and the impeller are made of high-quality durable plastic.
- 3 Position Switch
- Lead & plug
This fan comes with a lead and plug attached - therefore simply plugs into a powerpoint. An electrician is not required to perform installation. The lead attached to the fan is 1m in length.
Please note that the maximum temperature that the TT Silent Inline Fan 150mm cannot exceed is approx 60°.
Important Notice: A member of our technical team will install the lead and plug to the fan. Please be aware we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.
|Model Number||TT SILENT-M 150 VR|
|Installation||Includes Lead & Plug|
|Window Hole Size||No|
|Capacity (l/s)||166.67 l/s|
|Capacity (m3/hr)||0555 m3/hr|
|Rec Room Size (m3)||37|
|Built in Draft Stopper||No|
|Warranty||The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Disclaimer||*'Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|