This fan does not include a light
Fanco Infinity-iD DC Ceiling Fan – White 64″
$499.00
The Fanco Infinity-iD 64″ is ideally made for large living spaces or even outdoor undercovered areas with its impressive 162cm overall diameter. Powered by an energy-efficient DC motor, it consumes 4.6W at low speed and 32.3 at highest speed. The fan comes equipped with a remote control and supports SMART functionality. The architectural design of the fan is sure to enhance the aesthetic appeal of any modern interior. Read more about the fan below.
2 Year in Home + 6 Year Motor replacement (upon product registration)
You may also like…
- Description
- Airflow
- Additional information
- Reviews (0)
Description
Fanco Infinity-iD Key Features
| Installation Location | Indoor, Outdoor Undercover, Coastal |
|---|---|
| Blade Material | Plastic |
| Overall Diameter | 162cm (64″) |
| Blade Pitch | 13 Degrees |
| Motor Type | DC |
| Control Type | Remote Control|Smart Control |
| Summer / Winter use? | Reversible from remote |
| Ceiling to Blade Drop | 310mm |
| Angled Ceilings? | Suitable for angled ceilings up to 7 degrees |
| Light Included? | Not Included |
The Infinity-iD DC Ceiling Fan is a recent addition to Fanco’s Tri Control range. This elegantly designed ceiling fan is suitable for any part of your home including outdoor and coastal areas, due to its low-profile design and quiet operation. It comes with an inclusive wall control, remote control and SMART functionalities, enabling you to choose from six-speed settings. The highest setting produces an impressive 13,658 m3/hr airflow. Moreover, this fan has a reversible feature that can only be accessed through the remote.
Fanco Infinity-iD Performance Data
| Speed | RPM | Wattage | Airflow |
|---|---|---|---|
| 1 | 60 | 4.6W | 6,983 m3/hr |
| 2 | 85 | 6.4W | 8,136 m3/hr |
| 3 | 109 | 9.6W | 9,045 m3/hr |
| 4 | 133 | 14.1W | 10,795 m3/hr |
| 5 | 157 | 22.3W | 11,589 m3/hr |
| 6 | 180 | 32.3W | 13,658 m3/hr |
Control the fan’s speed, timer and reverse mode with the remote, and SMART control.
Additional information
| Brand | Fanco |
|---|---|
| Manufacturers Part Number | F8040/101A |
| Warranty Details | Fanco: 8 Year Warranty: 2 year limited in-home warranty + 6 year motor replacement warranty upon product registration. CONDITIONS APPLY. Visit Fanco website for terms and to register your product. |
| Installation Location | Indoor, Outdoor – Undercover, Coastal Rated |
| Overall Diameter | 162cm (64") |
| Control | Remote Control, Smart Control |
| Motor Type | DC |
| Blade Material | Plastic |
| Motor Colour | White |
| Blade Colour | White |
BarCode Number : 754523092300
Ceiling Fan Installation Disclaimer
1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician’s certificate of installation in a safe place.
2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs.
Ceiling Fan Warranty Disclaimer
1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty – this proof will need to be in the form of an invoice or receipt detailing the name and licence.
2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed.
3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions.
4. For comprehensive warranty information + terms and conditions please visit the manufacturers website.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.