DC Sub Floor Fan with 3 Speeds - White
This is an Australian Made three speed powered sub-floor vent that removes stale, damp air from beneath your house. It comes with a high quality motor suitable for continuous operation. View technical information below.
Features Overview:
| Installation: | Sub Floor Wall |
| Fan Capacity | 734 m3/hr |
| Noise: | 53.5 dB(A) |
| Wattage: | 30 w |
| Hole Size: | 250mm |
| Ductable: | Yes (only very short lengths) |
| IP Rating: | IP54 |
This is a highly efficient sub floor ventilation fan with a DC motor. It is a high quality product, designed to effectively remove subfloor damp and odours. The reliable German motor ensures the fan is suitable for continuous operation, although the fan can be purchased with a 24 hour timer (see accessory below) so you can specify operating hours.
This fan can be installed in the sub-floor brickwork or wall and replacement air holes placed into the opposite wall. It will exhaust air from the sub floor while replacement air will enter from the breather holes causing a cross flow ventilation pattern.
The fan is set to exhaust mode, if you want to use the fan to supply fresh air you can simply unscrew the plastic cover and mount the motor in reverse. Instructions on how to do this are included in the package.
Performance Data:
- Low Speed: 280 m3/hr – 4.4 watts – 32.8 dB(A)
- Medium Speed: 457 m3/hr – 11.6 watts – 43 dB(A)
- High Speed: 734 m3/hr – 30 watts – 53.5 dB(A)
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
| Model Number | EXBRECOWH |
|---|---|
| Application | Domestic |
| Brand | Edmonds |
| Colour | White |
| Motor Type | No |
| Shape | Square |
| Installation Location | No |
| Installation | Includes Lead & Plug |
| Hole Size | 250mm |
| Window Hole Size | No |
| Capacity (l/s) | 204 l/s |
| Capacity (m3/hr) | 734 m3/hr |
| Rec Room Size (m3) | 49 |
| Noise dB(A) | 53.5 |
| Power (Watts) | 30 |
| Ductable | Yes |
| Duct Size | 250mm |
| Built in Draft Stopper | No |
| Warranty | The Manufacturer offers a 2 year replacement warranty (conditions apply) |
| Dimensions |  |
| Disclaimer | *'Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician. |
