Atlas Irene-3 Hugger DC Ceiling Fan - Brushed Nickel 42"
The Atlas Irene-3 Hugger ceiling fan is a modern 6 speed fan with a diameter of 42" made of the finest aluminium and stamped steel. The Irene range has a rustic styled design with an energy efficient DC motor and solid walnut wooden blades. The fan comes with a remote control that can either be hand-held or wall mounted. This fan is suitable for indoor installation. As it is 'damp rated' it is also suitable for undercover, outdoor locations.
Irene-3 Hugger Features Overview:
|Motor Colour:||Brushed Nickel Motor & Walnut Blades|
|Blade Span:||42" (107cm)|
|Motor Type:||Energy Saving DC Motor|
|Summer/Winter Use:||Reversible From Remote|
|Ceiling to Blade Drop:||254mm (approx)|
|Angled Ceilings?||Install on FLAT Ceiling only|
|Light:||No light option|
The Irene 3 is now available in a new range of Low Profile models suitable for lower ceiling heights. Choose from three sizes (42", 52" and 60") and two different colours (Brushed Nickel and Textured Bronze). Both finishes can be installed indoor and in an outdoor, undercover setting.
- 42" (107cm) diameter with three solid wood, walnut-stained machine-cut blades.
- Available in the following damped location finishes: brushed nickel, or textured bronze.
- Constructed of cast aluminium and heavy stamped steel.
- Energy efficient, ultra-quiet DC motor.
- 6-speed remote control with reverse functionality.
The Irene is a damp rated fan with wooden blades. These blades can be used in an outdoor, undercover environment unlike other wooden blades because they are solid stained wood with a sealer on them. Typically other wooden blades that are either plywood or mdf would not be suitable.
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
|Style||Modern, Architectural / Designer|
|Location||Indoor, Outdoor - Damp Location (undercover)|
|Blade Span (Size)||42" (107cm)|
|Motor Colour||Brushed Nickel|
|IP Rating||No IP Rating Specified|
|Drop (Ceiling to Blade)||Approx 25.4cm (*total drop)|
|Number of Blades||3|
|RPM (High)||To be Confirmed|
|RPM (Low)||To be Confirmed|
|Motor (max)||To be Confirmed|
|Reversible (Summer/Winter)||Reversible From Remote|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable for installation on flat ceilings ONLY & should not be installed on a raked ceiling. Installing this ceiling fan on a raked ceiling may place strain on the motor and will be using the product in a way it is not designed to be used.|
|Warranty Details||Atlas: This fan comes complete with a 12 month Manufacturer's in-home warranty for defects. See www.atlasfans.com.au/warranties for more details . Conditions apply.|
|Warranty Disclaimer||1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|