Atlas Irene-3 DC Ceiling Fan - Textured Bronze 60"
This fan is suitable for ceilings which are 2.7m or higher as it drops approx 53cm from ceiling to blade. The Atlas Irene-3 is a modern 6 speed ceiling fan with a diameter of 60" made of the finest aluminium and stamped steel. The Irene 3 has a rustic style design with an energy efficient DC motor and solid walnut wooden blades. The fan comes with a hand-held remote control. This fan is 'damp rated' which means it can be installed outdoors in a covered location.
Irene-3 Features Overview:
Location: | Indoor/Outdoor (Undercover) |
Colour: | Textured Bronze Motor & Walnut Blades |
Blade Material: | Timber |
Blade Span: | 60" (152cm) |
Motor Type: | Energy Saving DC Motor |
Operation: | Remote Control |
Summer/Winter Use: | Reversible From Remote |
Ceiling to Blade Drop: | 530mm (approx) |
Angled Ceilings? | Suitable up to 30° |
Light: | No light option |
Please bear in mind that the Irene 3 has a drop from ceiling to blade of approx 53cm. For this reason the fan is only suitable for ceilings 2.7m and above.
- 60" (152cm) diameter with three solid wood, walnut-stained machine-cut blades.
- Available in the following damped location finishes: brushed nickel, or textured bronze.
- Constructed of cast aluminium and heavy stamped steel.
- Energy efficient, ultra-quiet DC motor.
- Compatible with flat or vaulted ceilings up to 30 degrees.
- 6-speed remote control with reverse functionality.
The Irene is a damp rated fan with wooden blades. These blades can be used in a damp environment unlike other wooden blades because they are solid stained wood with a sealer on them. Typically other wooden blades that are either plywood or mdf would not be suitable.
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
Model Number | IR3-TB-60 |
---|---|
Motor Type | DC |
Brand | Atlas |
Style | Modern, Architectural / Designer |
Location | Indoor, Outdoor - Damp Location (undercover) |
Blade Span (Size) | 60" (152cm) |
Motor Colour | Textured Bronze |
Blade Colour | Walnut |
Blade Material | Timber |
IP Rating | No IP Rating Specified |
Blade Pitch | 15° |
Drop (Ceiling to Blade) | Approx 53cm |
Number of Blades | 3 |
Airflow (Max) | To be Confirmed |
RPM (High) | To be Confirmed |
RPM (Low) | To be Confirmed |
Motor (max) | To be Confirmed |
Reversible (Summer/Winter) | Reversible From Remote |
Speeds | 6 speeds |
Voltage | 240V - Standard |
Suitability for Raked Ceilings | Suitable up to 30°* |
Warranty Details | Atlas: This fan comes complete with a 12 month Manufacturer's in-home warranty for defects. See www.atlasfans.com.au/warranties for more details . Conditions apply. |
Warranty Disclaimer | 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
Notice / Disclaimer | If you have any questions - please contact us. |