Sub Floor 12v Exhaust Fan
The Sub Floor 12v Exhaust Fan is suitable for single room or small area sub-floor ventilation. The high quality DC Brush less fan motor is designed for continuous running and long life. The visible cover is an anodized half chevron louvre with 5mm insect mesh.
$275.00
SKU
EXEXIWBF
Sub Floor Fan Features Overview:
Installation: | Sub Floor Wall |
Fan Capacity | 238 m3/hr |
Noise: | 42 dB(A) |
Wattage: | 9 w |
Hole Size: | 165mm x 230mm |
Ductable: | Yes (only very short lengths) |
The fan can be connected to 150mm ducting and multiple fans can be purchased to service a large area, when strategically positioned. You can also purchase a 24 hour timer if you wish to only run the fan for a predetermined number of hours.
- The fan comes with a transformer which is connected to a power point.
- Easy to install (2 brick by one brick cut out).
Finally this fan is very easy to install as it comes with a plug – no electrician required!
Model Number | EXEXIWBF |
---|---|
Application | Domestic |
Brand | Fanco |
Installation Location | Ceiling |
Installation | Includes Lead & Plug |
Hole Size | 165mm x 230mm |
Capacity (l/s) | 66.67 l/s |
Capacity (m3/hr) | 238 m3/hr |
Rec Room Size (m3) | 16 |
Noise dB(A) | 42 |
Ductable | Yes |
Duct Size | 150mm |
Built in Draft Stopper | No |
Warranty | The Manufacturer offers a 2 year replacement warranty (conditions apply) |
Dimensions | ![]() |
Disclaimer | *'Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician. |
Write Your Own Review
SUITABLE ACCESSORIES