The inline kit by Fanco comes complete with everything you need for instalaltion and includes an inline fan which is usually placed in the roof space, a vent for the ceiling of the room, a vent for the outside wall or eave and flexible duct to join it all together. It also includes a back draft shutter to stop warm air escaping or cold air coming into the house.
To view detailed specifications relating to the inline fan included in this kit please click here.
Inline Kit includes:
- 1x TT Mixflow 150 In Line Fan with Power Cord and Speed Switch
- 2 x Internal Round Cone Diffuser 150mm Click here for vent information
- 1 x External Vent 100-150mm
- 1 x Back draft shutter 150mm
- 1 x 6m Flexible Duct 150mm
- 1 x BTO 150mm x 150mm x 150mm
- 1 x Duct tape
The fan in this kit comes with a lead and plug attached. Therefore it will simply plug into a standard powerpoint. No electrician is required. The fan also comes with a built in speed switch, you can select either the high or low speed from the body of the fan.
|Installation||Includes Lead & Plug|
|Capacity (l/s)||144 l/s|
|Capacity (m3/hr)||520 m3/hr|
|Rec Room Size (m3)||37|
|Built in Draft Stopper||Yes|
|Warranty||The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|
The products listed below are compatible accessories for this item: