Vortice Vario Exhaust Fan 150mm
The Vario is an axial exhaust fan suitable for window or wall installation. It has electric shutters on the inside to prevent back drafts, the shutters are positioned behind the front grille automatically open and close slowly when the unit is operated. This model can also be wired to operate in reverse if required, meaning it can either be configured to supply or exhaust, depending on your requirements..
Vario 150 Features Overview:
|Installation:||Window / Wall|
|Hole Size:||185mm - 190mm|
The Vortice Vario fan is carefully designed to provide a low environmental impact, using recyclable materials and following the new “Design for Disassembly” technique to provide easy and environmentally friendly disposal of components. Vortice avoided polluting technologies in the production cycle, and even the packaging of the products adopts recycled paper andsafe non-polluting inks.
- If installed in a wall the cavity must not exceed 300mm in thickness.
- It is among the best of their category in terms of performance and low energy consumption thanks to highly efficient impellers.
- The outer casing is made from shock-resistant UV stablised ABS.
- Structural components UV resistant ABS, internal components from shock resistant PS.
|Installation Location||Wall or Window|
|Installation||Requires Hardwiring (electrician required)|
|Window Hole Size||185mm - 190mm|
|Capacity (l/s)||65.28 l/s|
|Capacity (m3/hr)||235 m3/hr|
|Rec Room Size (m3)||15|
|Built in Draft Stopper||Yes|
|Warranty||The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Dimensions||See image in gallery for detailed dimensions: Cover Size: 215mm x 215mm Hole Size: Between 185mm - 190mm|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|