Ventair Eko 3 in 1 Exhaust Fan White
The Eko Exhaust Fan is an easy clean low profile bathroom unit with fully enclosed ball bearing motor. The fan comes with two heat lamps and energy saving centre globe. Includes side ducted outlet with draft damper. View technical information below:
Eko Features Overview:
|Ductable:||Yes (125mm duct)|
|Hole Size:||355 x 200mm|
|Light||1 x R63 6w LED|
|Heat Lamp||2 x 275w|
|Required Cavity Height||200mm|
The Ventair Eko Exhaust Fan is a high quality bathroom exhaust fan with heat and light functionality is an energy saving 3-in-1 exhaust system.
Ventair Eko Features
- Increased exhaust performance ball bearing motor.
- Fully enclosed motor body with side ducted outlet.
- Comes with 125mm x 1.5m Alum Duct and a Fixed Grille.
- Includes a 3 gang switch, 2 x 275w Heat Lamps and 1 x 6w Energy Saving Globe.
This product comes with a 3 gang switch, meaning the light, heat and exhaust functions can be switched on independently. Consequently this product needs to be installed by a qualified electrician.
|Model Number||H2LW - ECO|
|Installation||Requires Hardwiring (electrician required)|
|Hole Size||355mm x 200mm|
|Capacity (l/s)||40.28 l/s|
|Capacity (m3/hr)||145 m3/hr|
|Rec Room Size (m3)||9.7|
|Built in Draft Stopper||Yes|
|Warranty||Ventair: The manufacturer offers a 3 year warranty|
|Dimensions||Grille Size: 430 x 250mm Cut out size: 355 x 200mm Min. install depth: 200mm Side outlet duct size: 125mm diameter|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|