Three Sixty Trinity DC Ceiling Fan with CCT LED Light - Black 48"
The Black Trinity DC LED ceiling fan features elegant curved blades and is powered by an energy efficient DC motor. The fan also features an integrated CCT LED light, that is also dimmable via the remote. The fan has 8 selectable speeds as well as a 'natural wind' mode and timer. Read more about this fan below.
Trinity DC Features Overview:
|Location:||Indoor / Outdoor (Undercover)|
|Blade Material:||Polymer (Plastic)|
|Blade Span:||48" (122cm)|
|Summer/Winter Use:||Reversible From Remote|
|Ceiling to Blade Drop:||340 mm (approx)|
|Angled Ceilings?||Max 10 Degrees|
|Light:||Dimmable CCT LED Light|
The Trinity DC Ceiling fan is an excellent choice for a bedroom in this all new 48" overall diameter size. This high airflow fan is incredibly energy efficient, with a 34 watt motor capable of producing an airflow of 11,280 m3/hr.
- 8 Speed Settings
- Reversible from remote
- Timer Function: Set the fan to switch off automatically after 1, 3, 6 or 8 hours.
- Turn off the remote's "beep" by holding down the power off button for 5 seconds
- CCT Light Options: Warm (3000K) | Cool (4000K) | Daylight (5000K)
- Lumens based on each temperature: Warm (1100) | Cool (1130) | Daylight (1200)
|Location||Indoor, Outdoor - Damp Location (undercover)|
|Blade Span (Size)||48" (122cm)|
|IP Rating||No IP Rating Specified|
|Globe Specification||20W CCT LED Light (Dimmable)|
|Globe Fitting||20w LED|
|Drop (Ceiling to Blade)||340mm|
|Number of Blades||3|
|Airflow (Max)||11,280 m3/hr|
|Reversible (Summer/Winter)||Reversible From Remote|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable up to 10°|
|Warranty Details||Three Sixty: This fan is covered by a manufacturer's 36 month (3 year) on-site warranty. Valid for Australian installations only. Conditions Apply.|
|Warranty Disclaimer||** Enclosed Outdoors: Products installed at least 1.5m from the perimeter of the roof / eaves of the enclosure (for protecting the product from direct or indirect rain water or sunlight)., 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|