Swift Ceiling Fan (Timber) - Antique Brass 48"
The Swift ceiling fan with timber blades offers an alternative indoor model to the Swift range. This model would be ideal for bedrooms with its quiet timber blades. Operated by wall control as standard, remote controls, light kits and extension rods are available separately.
Swift Features Overview:
|Motor Colour:||Antique Brass|
|Blade Span (Diameter):||48", 52"|
|Summer/Winter Use:||Reversible From Motor|
This model would be ideal for bedrooms with its quiet timber blades.
|Blade Span (Size)||48" (122cm)|
|Motor Colour||Antique Brass|
|Blade Colour (Reverse)||Oak|
|IP Rating||No IP Rating Specified|
|Light Kit||Light Adaptable|
|Drop (Ceiling to Blade)||250mm (approx)|
|Number of Blades||4|
|Reversible (Summer/Winter)||Reversible From Motor|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable up to 20°|
|Warranty Details||Mercator: This fan comes complete with a 2 year Manufacturer's in-home warranty + an extra 3 year motor warranty. Conditions apply - see www.mercator.com.au for more information|
|Warranty Disclaimer||1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|