Sub Floor Kit 7 - VKM 200 for area up to 200m3 with 2 Intakes

Sub Floor Kit 7 - VKM 200 for area up to 200m3 with 2 Intakes

january ceiling fan sale

Sub Floor Kit 7 - VKM 200 for area up to 200m3 with 2 Intakes

90% of 100

CUSTOMER NOTICE: This fan is available to purchase on PRE-ORDER ETA Late January. Any orders placed will be dispatched when in stock.

The Sub Floor Kit is a pre packaged sub floor ventilation solution consisting of an inline fan and all necessary components required to put together a ventilation system. This includes a fan connected to a lead and plug, however if you are purchasing additional accessories, please check to see if they need to be hard wired by an electrician. View all technical information below:


Sub Floor Kit 7 Features Overview:

Installation: Under House
Fan Capacity 1100 m3/hr
Noise: 51 dB(A)
Wattage: 193 w
Ducting: 18m of flexible duct

View the image gallery for a typical installation diagram.

Sub Floor Kit Includes

  • 1x VKM 200mm Inline fan
  • Fan comes with lead and plug. If purchasing additional speed controller, the fan will need to be disconnected from the lead & plug and hard wired
  • 1x 6m of 200mm duct
  • 2x 6m of 150mm duct
  • 2x Plastic Cone Vents
  • 1x BTO 200X150X150
  • 1x 200-150 Reducer
  • 1x External Wall Vent
  • 1x 24hour Timer (The timer is plugged into a standard power point)
  • 1x Flex & Plug (The fan is then plugged into the timer)
  • 1x Roll on hanging tape (allows ducting to hang from joists)
  • 1x Roll of duct tape (allows secure connection of the system)


Some buildings have very little subfloor ventilation. Inadequate underfloor ventilation can lead to an accumulation of moisture in the sub floor. This in turn can cause structural and health problems for the home and it’s occupants.

The most common reason for inadequate under floor ventilation is that there not enough vents, or they are too small for the size and layout of building. Building extensions, building location and soil type can all contribute to problems in the subfloor.

More Information
Model Number EUFUK4F
Application Domestic
Brand Fanco
Motor Type Centrifugal
Installation Includes Lead & Plug, Accessories May Require Hardwiring
Capacity (l/s) 305.56 l/s
Capacity (m3/hr) 01100 m3/hr
Rec Room Size (m3) 73
Noise dB(A) 51
Power (Watts) 193
Ductable Yes
Duct Size 200mm
Built in Draft Stopper No
Warranty The Manufacturer offers a 2 year replacement warranty (conditions apply)
Dimensions vkm dimensions
Pressure Curve vkm curve
Disclaimer *'Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.
Write Your Own Review