The S Series exhaust fan range features a basic design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust with a capacity of 95m3/hr.
It can be connected to ducting and is available in white in 100, 125 and 150mm sizes.
The S Series range has an axial motor, therefore any ducting is recommended to be as short and direct as possible. Ideally you would only use 1-2m of flexible ducting with these fans. For more information please refer to the pressure curve.
This fan comes ready to be hard wired to a switch. A lead and plug may be added by the installer for connection to a power socket.
|Installation Location||Wall or Ceiling|
|Installation||Requires Hardwiring (electrician required)|
|Capacity (l/s)||26.39 l/s|
|Capacity (m3/hr)||95 m3/hr|
|Rec Room Size (m3)||6|
|Built in Draft Stopper||No|
|Warranty||Fanco: The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|
The products listed below are compatible accessories for this item: