Details
The Maxair exhaust fans are the easiest to install and are supplied with unique ductwork that will easily fit walls between 110 and 310mm deep. No cable ties or tape is needed, as the duct attaches easily to the fan’s unique ‘duct grippers’. Both fans are configured to allow a flex and plug to be fitted or they can be wired direct.
Additional Information
| Model Number | EWAF150P |
|---|---|
| Application | Domestic |
| Brand | Clipsal |
| Colour | White |
| Shape | Square |
| Installation Location | Wall |
| Installation | Requires Hardwiring (electrician required) |
| Hole Size | Between 170mm - 210mm |
| Capacity (l/s) | 100 l/s |
| Capacity (m3/hr) | 360 m3/hr |
| Rec Room Size (m3) | 24 |
| Noise dB(A) | 49 |
| Power (Watts) | 38 |
| Ductable | No |
| Built in Draft Stopper | Yes |
| Warranty | The Manufacturer offers a 3 year replacement warranty (conditions apply) |
| Dimensions |  |
| Disclaimer | *"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician. |
The products listed below are compatible accessories for this item:
Write Your Own Review
Accessories
Flex & Plug (with 1m flex 3 pin)
$15.00
|
Duct Tape 1x Roll
$5.00
|
