Precision Ceiling Fan - 304 Brushed Nickel 48"
The Precision ceiling fan (304) in brushed nickel features a brushed steel motor housing with high quality 304 stainless steel blades. These durable blades provide some resistance to harsher environments with a rust proof treatment applied to hinder rust development. Operated by wall control as standard, a remote can be purchased as an accessory to the Precision along with light and extension rod accessories.
Precision Features Overview:
Location: | Indoor |
Colour: | Brushed Nickel Motor & Blades |
Blade Material: | 304 Stainless Steel |
Blade Span: | 48" (122cm) |
Motor Type: | AC |
Operation: | Wall Control |
Summer/Winter Use: | Reversible From Motor |
Ceiling to Blade Drop: | 300mm (approx) |
Angled Ceilings? | Suitable up to 28 degrees (wall control) Suitable up to 12 degrees (remote) |
Light: | Light Adaptable - see accessories |
This 304 Precision model is not suitable for high chloride environments such as salt air areas, and is recommended for indoor use.
Maximum rake ceiling it can be installed on:
With Remote Installation: Suitable up to 12 degrees
Without Remote Installation (Wall Control): Suitable up to 28 degrees
Model Number | MPF3042SS |
---|---|
Motor Type | AC |
Brand | Martec |
Style | Modern |
Location | Indoor |
Blade Span (Size) | 48" (122cm) |
Motor Colour | Brushed Nickel |
Blade Colour | Brushed Nickel |
Blade Material | Stainless Steel |
IP Rating | No IP Rating Specified |
Light Kit | Light Adaptable |
Blade Pitch | 23 |
Drop (Ceiling to Blade) | 300mm (approx) |
Number of Blades | 4 |
Airflow (Max) | To be Confirmed |
RPM (High) | 252 |
RPM (Low) | 96 |
Motor (max) | 74.2 |
Reversible (Summer/Winter) | Reversible From Motor |
Speeds | 3 speeds |
Voltage | 240V - Standard |
Suitability for Raked Ceilings | Suitable up to 28° |
Warranty Details | Martec: This fan comes complete with a 3 year Manufacturer's in-home warranty. Lights and controls have a separate warranty. Conditions apply - see www.martecaustralia.com.au for more information. |
Warranty Disclaimer | 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
Notice / Disclaimer | If you have any questions - please contact us. |