Precision Ceiling Fan - 316 Stainless Steel 52"
The Precision ceiling fan with a 316 stainless steel construction is perfect for high chloride (salt) air prone areas. If you live near the ocean or have any salt spray around, the Precision 316 is a go-to fan for these requirements (see notes below for outdoor installations*). Operated by wall control as standard, a remote can be purchased as an accessory to the Precision along with light and extension rod accessories.
Precision Features Overview:
| Location: | Indoor/Outdoor/Coastal* |
| Colour: | Stainless Steel Motor & Blades |
| Blade Material: | 316 Stainless Steel |
| Blade Span: | 52" (132cm) |
| Motor Type: | AC |
| Operation: | Wall Control |
| Summer/Winter Use: | Reversible From Motor |
| Ceiling to Blade Drop: | 300mm (approx) |
| Angled Ceilings? | Suitable up to 28 degrees (wall control) Suitable up to 12 degrees (remote) |
| Light: | Light Adaptable - see accessories |
*This 316 Precision model is not IP rated and not impervious to the elements, however it stands up rather well to a salt-water environment. The 316 stainless steel helps prevent overall corrosion over and above that of the 304 model, offering a higher resistance to salt environments, although tea staining still may occur. Taking the advice of the manufacturer in the cleaning of your fan can help delay the affects. If it is installed outside it needs to be under cover and surrounded by 3 walls or in an outdoor enclosure. If water gets into the fan, the warranty will be void.
Maximum rake ceiling it can be installed on:
With Remote Installation: Suitable up to 12 degrees
Without Remote Installation (Wall Control): Suitable up to 28 degrees
| Model Number | MPF3163SS |
|---|---|
| Motor Type | AC |
| Brand | Martec |
| Style | Modern |
| Location | Indoor, Outdoor - Damp Location (undercover), Outdoor - Coastal Location (limited) |
| Blade Span (Size) | 52" (132cm) |
| Motor Colour | Stainless Steel |
| Blade Colour | 316 Stainless Steel |
| Blade Material | Stainless Steel |
| IP Rating | No IP Rating Specified |
| Light Kit | Light Adaptable |
| Blade Pitch | 23 |
| Drop (Ceiling to Blade) | 300mm (approx) |
| Number of Blades | 4 |
| Airflow (Max) | To be Confirmed |
| RPM (High) | 231 |
| RPM (Low) | 100 |
| Motor (max) | 70.2 |
| Reversible (Summer/Winter) | Reversible From Motor |
| Speeds | 3 speeds |
| Voltage | 240V - Standard |
| Suitability for Raked Ceilings | Suitable up to 28° |
| Warranty Details | Martec: This fan comes complete with a 3 year Manufacturer's in-home warranty. Lights and controls have a separate warranty. Conditions apply - see www.martecaustralia.com.au for more information. |
| Warranty Disclaimer | 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
| Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
| Notice / Disclaimer | If you have any questions - please contact us. |
