Details
Maximum rake ceiling it can be installed on:
With Remote Installation: Suitable up to 12 degrees
Without Remote Installation (Wall Control): Suitable up to 28 degrees
Additional Information
| Model Number | DLS134M |
|---|---|
| Motor (Current) | AC |
| Brand | Martec |
| Style | Modern |
| Location | Indoor |
| Blade Span (Size) | 52" (132cm) |
| Motor Colour | Matte Black |
| Blade Colour | Matte Black |
| Blade Material | Timber |
| IP Rating | No IP Rating Specified |
| Blade Pitch | 12.5 |
| Drop (Ceiling to Blade) | 315mm (approx) - Ceiling to Base |
| Number of Blades | 4 |
| Airflow (Max) | To be Confirmed |
| RPM (High) | 195 |
| RPM (Low) | 90 |
| Motor (max) | 69 |
| Reversible (Summer/Winter) | Reversible From Motor |
| Speeds | 3 speeds |
| Voltage | 240V - Standard |
| Suitability for Raked Ceilings | Suitable up to 28° |
| Warranty Details | Martec: This fan comes complete with a 3 year Manufacturer's in-home warranty. Lights and controls have a separate warranty. Conditions apply - see www.martecaustralia.com.au for more information. |
| Warranty Disclaimer | 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
| Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
The products listed below are compatible accessories for this item:
Accessories
-
-
-
$90.50 $70.50 -
