Inline Kit 5: Large Toilet / Bathroom Kit with TT Silent 150mm
The Kit 5: Large Toilet / Bathroom Kit is a powerful inline kit with a 150mm mixflow inline fan. The kit is designed to exhaust large sized rooms and would be ideal for a toilet or bathroom. The fan included in this kit has been designed to operate very quietly.
Inline Kit Features Overview:
|Installation:||Typically in Ceiling Cavity|
|Fan Capacity||555 m3/hr|
|Ducting:||6m of 150mm flexible duct|
The inline kit by Fanco comes complete with everything you need for instalaltion and includes an inline fan which is usually placed in the roof space, a vent for the ceiling of the room, a vent for the outside wall or eave and flexible duct to join it all together. It also includes a back draft shutter to stop warm air escaping or cold air coming into the house. This kit is made for DIY installation. It contains a fan with a lead and plug. However, if you are purchasing additional accessories, please check to see if they need to be hard wired by an electrician.
To view detailed specifications relating to the inline fan included in this kit please click here.
Inline Kit includes:
- 1x TT Silent Mixflow 150 In Line Fan
- Lead and Plug. Fan comes with lead and plug connected to high speed. If purchasing additional speed controller, the fan will need to be disconnected from the lead & plug and hard wired
- 1 x Internal Round Cone Diffuser 150mm Click here for vent information
- 1 x External Vent 100-150mm
- 1 x Back draft shutter 150mm
- 1 x 6m Flexible Duct 150mm
- 1 x Duct tape
The fan in this kit comes with a lead and plug attached. Therefore it will simply plug into a standard powerpoint. No electrician is required.
|Installation||Includes Lead & Plug, Accessories May Require Hardwiring|
|Capacity (l/s)||166.67 l/s|
|Capacity (m3/hr)||0555 m3/hr|
|Rec Room Size (m3)||37|
|Built in Draft Stopper||Yes|
|Warranty||The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|