The VORTX V500 exhaust fan is a very high capacity exhaust fan that can be mounted on either a wall or ceiling. For ceiling installation the fan has plasterboard clips. If you wish to install in a wall or ceiling without the clips these can be removed. You then simply have to pop the cover off the fan and screw into the wall/ceiling via the screw holes on the corner of the cover.
The Vortx fan features a fully sealed IP 44 rated motor. This means long life, quiet (at low speeds) operation and resistance to damage by dirt and insects.
Ducting Disclaimer: Please be aware that the 150mm ducting will be a tight fit so be prepared to cut the end of the ducting to fit more easily over the fan.
|Installation Location||Wall or Ceiling|
|Installation||Includes Lead & Plug|
|Capacity (l/s)||141.67 l/s|
|Capacity (m3/hr)||510 m3/hr|
|Rec Room Size (m3)||34|
|Built in Draft Stopper||No|
|Warranty||The Manufacturer offers a 3 year replacement warranty (conditions apply)|
|Dimensions||Cover Size: 235mm Round Hole Size: 210mm Round|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|
The products listed below are compatible accessories for this item: