Hunter Original Ceiling Fan - Black 52"
The Hunter Original ceiling fan is one of the pure classic ceiling fans which brings together traditional style with a well-built cast iron construction engineered by Hunter Fans. The Hunter Original is 52" (132cm) in diameter and comes with 5 furniture grade veneer reversible blades but can be installed with 4 if desired. This fan comes with a pull cord as standard however a wall control or remote control can be purchased separately for easy operation. Important Notice: The Hunter Original Fan needs to be mounted directly from a building structure / outlet box acceptable for fan support of 70lbs (31.8 kg) or less. Please note boxes commonly used for the support of lighting fixtures are not suitable for fan support and may need to be replaced. Consult a qualified electrician if you are in doubt.
Hunter Original Features Overview:
|Location:||Indoor/ Outdoor (Undercover)|
|Colour:||Black Motor & Cherry/Walnut Blades|
|Blade Span:||52" (132cm)|
|Summer/Winter Use:||Reversible From Motor|
|Ceiling to Blade Drop:||301mm (approx)|
|Angled Ceilings?||Suitable up to 34 degrees|
|Light:||Light adaptable - see accessories|
The Hunter Original ceiling fan is indoor and outdoor rated suitable for installation under a covered location.
If an extension rod is required, the graphite rod will be suitable.
|Location||Indoor, Outdoor - Damp Location (undercover)|
|Blade Span (Size)||52" (132cm)|
|Blade Colour (Reverse)||No|
|IP Rating||No IP Rating Specified|
|Light Kit||Light Adaptable|
|Blade Pitch||To be Confirmed|
|Drop (Ceiling to Blade)||301mm (approx)|
|Number of Blades||5|
|Airflow (Max)||12005 m3/hr|
|Reversible (Summer/Winter)||Reversible From Motor|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable up to 34°*|
|Warranty Details||Hunter: This fan comes complete with a 12 month Manufacturer's in-home warranty for defects. All motors come with a limited lifetime warranty. Conditions apply - see www.hunterfans.com.au/hunter-warranty for more information.|
|Warranty Disclaimer||1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|