Wynd DC Ceiling Fan With Remote - Oil Rubbed Bronze with Handcrafted Walnut Blades 54"
Expert craftsmanship gives us the Wynd DC ceiling fan with remote, a pleasing combination of wood and bronze. The Wynd exudes natural beauty with its oil-rubbed bronze motor anchoring a trio of handcrafted timber blades. All three blades are coated in walnut for a charming finish. This fan’s charm is only exceeded by its capability. On its highest setting, the Wynd uses no more than 32 watts to rotate as many as 197 times per minute.
Wynd DC Features Overview:
|Blade Span:||54" (137cm)|
|Motor Type:||Energy Saving DC Motor|
|Summer/Winter Use:||Reversible From Remote|
|Ceiling to Blade Drop:||275mm|
|Angled Ceilings?||Suitable up to 10 degrees|
|Light:||No light option|
- Handcrafted timber blades.
- Larger than average blade span.
- 6 speeds, ranging from 50 to 195 revolutions per minute.
- Remote control includes wall cradle.
- Variable Airflow.
- Low running costs - uses between 3 and 32 watts depending on speed setting.
- Design and size makes the Wynd a popular choice for living areas.
- Capable of gentle airflow on low settings, so it’s also suitable for bedroom use!
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
|Style||Modern, Architectural / Designer|
|Blade Span (Size)||54" (137cm)|
|Motor Colour||Oil Rubbed Bronze|
|IP Rating||No IP Rating Specified|
|Blade Pitch||13 degrees|
|Drop (Ceiling to Blade)||300mm (approx)|
|Number of Blades||3|
|Airflow (Max)||11,043 m3/hr|
|Motor (max)||32W DC|
|Reversible (Summer/Winter)||Reversible From Remote|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable up to 10°|
|Warranty Details||Fanco: 2 year in home repair or replace warranty followed by 3 year repair or replacement warranty for motor only. Conditions apply and labour cost is limited, visit the fanco website for more information.|
|Warranty Disclaimer||** Enclosed Outdoors: Products installed at least 1.5m from the perimeter of the roof / eaves of the enclosure (for protecting the product from direct or indirect rain water or sunlight)., 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|