Fanco Mixflow TT Inline Fan 200mm with Inbuilt Speed Switch & Plug
The Fanco TT 200 has two speeds which can be selected via the switch on the side of the motor. The lower setting has an output capacity of 830m3/hr, the higher setting has an output capacity of 1040m3/hr. If the fan is set on the lower setting, the fan is much quieter. This fan plugs into an existing powerpoint. If you are purchasing accessories, please check to see if they need to be installed by an electrician.
TT Features Overview:
| Installation: | Usually Roofspace |
| Colour: | White |
| Wattage: | 125 w (90 on low) |
| Ductable: | Yes (200mm duct) |
The Fanco TT range is a high quality range of mixflow inline fans. Typically these fans are used for exhaust applications. If you wish to switch between the high and low speed you will need to purchase the additional speed controller. See accessories below for the controller and other components designed to be used in conjunction with the fan.
TT Inline Fan Features:
- Ball bearing motors with two speeds
- Built in overheating protection with automatic restart
- Motor protection rating IP X4
- The casing is made of high-quality durable ABS plastic (TT 100-200)
- or fire resistant polypropylene (TT 250-315)
- Clever design ensures easy service and maintenance access
This fan comes with a lead and plug attached - therefore simply plugs into a powerpoint. An electrician is not required to perform installation. However, please be aware that you will require an electrician if you choose to use this fan in conjunction with hardwired accessories, including but not limited to speed controllers. The lead attached to the fan is 1m in length.
Important Notice: A member of our technical team will install the lead and plug to the fan. Please be aware we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.
| Model Number | EXVUTTP200RV |
|---|---|
| Application | Commercial |
| Brand | Fanco |
| Colour | White |
| Motor Type | Mixflow |
| Shape | Round |
| Installation | Includes Lead & Plug, Accessories May Require Hardwiring |
| Capacity (l/s) | 289 l/s |
| Capacity (m3/hr) | 1040 m3/hr |
| Rec Room Size (m3) | 69 |
| Noise dB(A) | 52 |
| Power (Watts) | 125 |
| Ductable | Yes |
| Duct Size | 200mm |
| Built in Draft Stopper | No |
| Warranty | The Manufacturer offers a 2 year replacement warranty (conditions apply) |
| Disclaimer | *'Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician. |
