-11%

Fanco Mixflow TT Inline Fan 150mm with Speed Switch & Plug

Fanco Mixflow TT Inline Fan 150mm with Speed Switch & Plug

Fanco Mixflow TT Inline Fan 150mm with Speed Switch & Plug

$169.00

In stock

$169.00

The Fanco TT 150 has two speeds. This model is unique as you can select the relevant speed from a switch on the side of the motor. The lower setting has an output capacity of 405m3/hr, the higher setting has an output capacity of 520m3/hr. If the fan is set on the lower setting, the fan is much quieter.

This fan plugs into an existing powerpoint. If you are purchasing accessories, please check to see if they need to be installed by an electrician.

View cart

You may also like…

Description

TT 150 Overview:

Speed HIGH LOW
Capacity 520 m3/hr 405 m3/hr
Noise 44 dB(A) 33 dB(A)
Wattage 60w 40w
Ductable Yes (150mm duct)

The Fanco TT range is a high quality range of mixflow inline fans. Typically these fans are used for exhaust applications.

TT Inline Fan Features:

  • Ball bearing motors with two speeds
  • Built in overheating protection with automatic restart
  • Motor protection rating IP X4
  • The casing is made of high-quality durable ABS plastic (TT 100-200)
  • or fire resistant polypropylene (TT 250-315)
  • Clever design ensures easy service and maintenance access

This fan comes with a lead and plug attached – therefore simply plugs into a powerpoint. An electrician is not required to perform installation. However, please be aware that you will require an electrician if you choose to use this fan in conjunction with hardwired accessories, including but not limited to speed controllers. The lead attached to the fan is approx 1m in length.

Important Notice: A member of our technical team will install the lead and plug to the fan. Please be aware we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.

Additional information

Brand

Fanco

Colour

White

Installation

Includes Lead & Plug, Accessories May Require Hardwiring

Warranty

The Manufacturer offers a 2 year replacement warranty (conditions apply)

Motor Type

Mixflow

Manufacturers Part Number

EXVUTT150RV

BarCode Number : 4823059388242

All data is provided the manufacturer. Capacity figures are based on the extraction rate of the unit in 'freeflow'. This means without any ducting, vents or other components. As you add ducting to a fan it will impact the extraction rate as this introduces resistance. For this reason if you are ducting an extraction fan it is best to keen the run as short, tight and direct as possible. For more information please view our exhaust fan buying guide.

For comprehensive warranty information relating to this product please visit the manufacturers website.

13 reviews for Fanco Mixflow TT Inline Fan 150mm with Speed Switch & Plug

  1. 5 out of 5

    Fiona Childs (verified owner)

    Purchased for a client so I guess they are happy with it as they ordered more.

  2. 5 out of 5

    James

    Very happy and satisfied with my new bathroom exhaust. I live in the tropics so my bathroom was always very steamy, moisture running down the walls, fogged mirrors, mould and now it’s as dry as a bone after the hottest of showers. There is no fan noise only the sound of air rushing through the intake vent, which I don’t find intrusive on my (preferred) highest setting and almost silent on low. I found the website very helpful configuring my set up and delivery was fast. All items are good quality, I bought the TT 150 inline exhaust fan, a 240-150mm plastic vent, 150mm flue kit and insulated ducting, tape, clamps. Only needed an electrician for the switch. Highly recommend Fansonline Australia.

  3. 4 out of 5

    Douglas

    Fan seems good quality and is a lot quieter than I expected. The 3 position switch, 2 speed and off, is a little redundant as the fan is mounted in the ceiling and once set up is only single speed unless I want to climb back in the ceiling to change it. I may install a fan controller where I have the on/off switch on the wall if I think it is necessary in the future.
    The nozzles at each end are a bit short and it is fiddly to attach insulated ducting to them, being a bit longer or having a lip on the end of them would be better.

  4. 5 out of 5

    Robert

    exactly as described on the website, easy to install and is performing well.

  5. 5 out of 5

    RICK

    Works well, quite ,,,,,,,,

  6. 5 out of 5

    Grahame

    Very quiet on low speed and delivers more air than the old 300mm axial flow fan. Easily reduced flow even further by fitting some extra flexible ducting on the outlet to baffle the output.

  7. 4 out of 5

    Gary

    It does the job of replacement in many apartments

  8. 5 out of 5

    Peter

    Easy to install and works very effectively- love the two speed option

  9. 5 out of 5

    Scott

    Works as advertised, the speed switch is a good addition

  10. 5 out of 5

    Kylie

    Easy to order fast delivery

  11. 5 out of 5

    Jake

    easy transaction great service

  12. 5 out of 5

    Danny

    The fan we have installed was not doing the job. I have installed this fan inline has made all the difference

  13. 5 out of 5

    JOHN

    Just what I wanted to meet the need


Only logged in customers who have purchased this product may leave a review.