-16%

Fanco Mixflow TT Inline Fan 125mm with Lead & Plug

Fanco Mixflow TT Inline Fan 125mm with Lead & Plug

Fanco Mixflow TT Inline Fan 125mm with Lead & Plug

$134.00

In stock

$134.00

The Fanco TT 125 has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 200m3/hr, the higher setting has an output capacity of 280m3/hr. If the fan is set on the lower setting, the fan is much quieter. This fan plugs into an existing power point. If you are purchasing accessories, please check to see if they need to be installed by an electrician.

SKU: W-EXVUTT125-LP Categories: , ,
View cart

Description

TT Features Overview:

Speed HIGH LOW
Capacity 280 m3/hr 200m3/hr
Noise 38 dB(A) 28 dB(A)
Wattage 32w 23w
Ductable Yes – 125mm diameter

The Fanco TT range is a high quality range of mixflow inline fans. Typically these fans are used for exhaust applications.

TT Inline Fan Features:

  • Ball bearing motors with two speeds
  • Built in overheating protection with automatic restart
  • Motor protection rating IP X4
  • The casing is made of high-quality durable ABS plastic (TT 100-200)
  • or fire resistant polypropylene (TT 250-315)
  • Clever design ensures easy service and maintenance access

This fan comes with a lead and plug attached – therefore simply plugs into a power point. An electrician is not required to perform installation. However, please be aware that you will require an electrician if you choose to use this fan in conjunction with hardwired accessories, including but not limited to speed controllers. The lead attached to the fan is 1m in length.

Important Notice: A member of our technical team will install the lead and plug to the fan. Please be aware we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.

Additional information

Brand

Fanco

Colour

White

Installation

Includes Lead & Plug, Accessories May Require Hardwiring

Warranty

The Manufacturer offers a 2 year replacement warranty (conditions apply)

Motor Type

Mixflow

Manufacturers Part Number

EXVUTT125 – EALEAD

BarCode Number :

All data is provided the manufacturer. Capacity figures are based on the extraction rate of the unit in 'freeflow'. This means without any ducting, vents or other components. As you add ducting to a fan it will impact the extraction rate as this introduces resistance. For this reason if you are ducting an extraction fan it is best to keen the run as short, tight and direct as possible. For more information please view our exhaust fan buying guide.

For comprehensive warranty information relating to this product please visit the manufacturers website.

1 review for Fanco Mixflow TT Inline Fan 125mm with Lead & Plug

  1. 5 out of 5

    STAN

    EASY TO INSTALL & FIT FOR PURPOSE


Only logged in customers who have purchased this product may leave a review.

SKU: W-EXVUTT125-LP Categories: , ,