Fanco Infinity-ID DC Ceiling Fan with Wall Control - White 48"
Introducing the all new 48" Infinity-ID complete with a hardwired DC wall controller with 6 selectable speeds. Powered by an improved motor with improved airflow on the high speed and even lower power consumption. Featuring the increasingly popular, minimalistic design with three lightweight ABS blades that elegantly join to create a seamless design.
Please note that the wall controller requires a specific and accurate hole size in the gyprock. Take a look at the fanco recommended installation guide for more information.
As the face of this wall controller is 85mm square, if you are replacing a standard sized wall control you may need to patch the hole or install a blank plate and install this controller next to it. We would recommend discussing with your installing electrician prior to purchasing to determine suitability.
Key Features:
| Install Location: | Indoor / Outdoor (Undercover) & Coastal |
| Blade Material: | ABS Plastic |
| Blade Span: | 48" (122cm) |
| Motor Type: | Energy Saving DC Motor |
| Operation: | Hardwired Wall Control |
| Summer/Winter Use: | Not Reversible |
| Ceiling to Blade Drop: | 270mm |
| Angled Ceilings? | Suitable up to 7 degrees |
| Light: | Not available with light & wall control |
Other Details:
- Slimline Scandinavian design powered by a quiet DC motor
- Blade span makes this fan a great choice for a bedroom
- Flexible in installation with the Infinity-ID suitable for indoor & outdoor (undercover) locations
- Hardwired DC wall controller
- Updated construction & materials - all ABS and electroplated metal, making this fan suitable for indoors, outdoors and coastal locations.
Performance Data:
| SPEED | RPMS | WATTS | AIRFLOW |
| 1 | 90 | 4.3 | 4,453 m3/hr |
| 2 | 118 | 5.7 | 5,646 m3/hr |
| 3 | 146 | 7.6 | 6,259 m3/hr |
| 4 | 175 | 10.6 | 7,542 m3/hr |
| 5 | 203 | 15 | 8,367 m3/hr |
| 6 | 230 | 21.3 | 9,411 m3/hr |
Performance Summary:
- A great range of speeds ranging from 90 - 230 RPM
- Class leading energy efficiency, only 21.3w on the highest speed
- Impressive airflow for a fan of this size - 9,411 m3/hr on the highest speed.
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
| Model Number | CFFCINID2WHW |
|---|---|
| Motor Type | DC |
| Brand | Fanco |
| Style | Modern, Architectural / Designer |
| Location | Indoor, Outdoor - Damp Location (undercover), Outdoor - Coastal Location (limited) |
| Blade Span (Size) | 48" (122cm) |
| Motor Colour | White |
| Blade Colour | White |
| Blade Material | Plastic |
| IP Rating | No IP Rating Specified |
| Blade Pitch | Approx 12 degrees |
| Drop (Ceiling to Blade) | 270mm |
| Number of Blades | 3 |
| Airflow (Max) | 9,411 m3/hr |
| RPM (High) | 230 |
| RPM (Low) | 90 |
| Motor (max) | 21.3w |
| Reversible (Summer/Winter) | Not reversible |
| Speeds | 6 speeds |
| Voltage | 240V - Standard |
| Suitability for Raked Ceilings | Suitable up to 7° |
| Warranty Details | Fanco: 2 year in home repair or replace warranty followed by 3 year repair or replacement warranty for motor only. Conditions apply and labour cost is limited, visit the fanco website for more information. |
| Warranty Disclaimer | ** Enclosed Outdoors: Products installed at least 1.5m from the perimeter of the roof / eaves of the enclosure (for protecting the product from direct or indirect rain water or sunlight)., 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. -- |
| Installation Disclaimer | 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. -- |
| Notice / Disclaimer | If you have any questions - please contact us. |
This item typically dispatches within 1-2 business days unles otherwise stated (eg on PRE ORDER).
