Edmonds Airomatic Roof Ventilator – Woodland Grey
The Edmonds Airomatic Roof Ventilator is a sophisticated powered roof top ventilator, developed to meet the cooling and drying needs of residential homes. Designed for removal of heat trapped in the roof cavity of a home in summer and removal of moisture trapped in the roof cavity of a home in winter.
Airomatic Features Overview:
| Installation: | Roof |
| Colour: | Grey |
| Capacity | 647 m3/hr |
| Noise: | 53 dB(A) |
| Wattage: | 30 w |
| Ductable: | No |
The Edmonds Airomatic is the first of Edmonds range of ventilators developed using advanced CFD (Computational Fluid Dynamics) software, as used in the aerospace industry. This software has allowed Edmonds to produce a ventilator with a higher flow rate and efficiency than other ventilators while reducing its overall noise level and physical size. The unique Edmonds design speed controller allows the selection of three fixed speeds, allowing just the right amount of flow to be set to suit the severity of the conditions without increasing power consumption. It can be mounted to any rake between 3 and 35 degrees.
- Low Speed: 291 m3/hr | 4 watts | 35.4 dB(A)
- Medium Speed: 434 m3/hr | 12 watts | 45.1 dB(A)
- High Speed: 647 m3/hr | 30 watts | 52.9 dB(A)
| Model Number | ERBRAIGR |
|---|---|
| Application | Domestic |
| Brand | Edmonds |
| Colour | Woodland Grey |
| Motor Type | No |
| Shape | Round |
| Installation Location | Roof |
| Installation | Includes Lead & Plug |
| Hole Size | No |
| Window Hole Size | No |
| Capacity (l/s) | 180 l/s |
| Capacity (m3/hr) | 647 m3/hr |
| Rec Room Size (m3) | 43 |
| Noise dB(A) | 53 |
| Power (Watts) | 30 |
| Ductable | No |
| Duct Size | No |
| Built in Draft Stopper | No |
| Warranty | The Manufacturer offers a 2 year replacement warranty (conditions apply) |
| Disclaimer | *"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician. |