Atlas Irene-5 DC Ceiling Fan - Textured Bronze 52"
This fan is suitable for ceilings which are 2.7m or higher as it drops approx 53cm from ceiling to blade. The Atlas Irene-5 is a modern 6 speed ceiling fan with a diameter of 52" made of the finest aluminium and stamped steel. The Irene 5 has a rustic style design with an energy efficient 30.7 watt DC motor and 5 neatly propeller-shaped solid walnut wooden blades. The fan comes with a hand-held remote control. This fan is 'damp rated' which means it can be installed outdoors in a covered location.
Irene-5 Features Overview:
|Colour:||Textured Bronze Motor & Walnut Blades|
|Blade Span:||52" (132cm)|
|Motor Type:||Energy Saving DC Motor|
|Summer/Winter Use:||Reversible From Remote|
|Ceiling to Blade Drop:||530mm (approx)|
|Angled Ceilings?||Suitable up to 30°|
|Light:||No light option|
Please bear in mind that the Irene 5 has a drop from ceiling to blade of approx 53cm. For this reason the fan is only suitable for ceilings 2.7m and above.
- 52" (132cm) diameter with five solid wood, walnut-stained machine-cut blades.
- Available in the following damped location finishes: brushed nickel, polished chrome or textured bronze.
- Constructed of cast aluminium and heavy stamped steel.
- Energy efficient, ultra-quiet 30.7 watt DC motor.
- Compatible with flat or vaulted ceilings up to 30 degrees.
- 6-speed remote control with reverse functionality.
The Irene is a damp rated fan with wooden blades. These blades can be used in a damp environment unlike other wooden blades because they are solid stained wood with a sealer on them. Typically other wooden blades that are either plywood or mdf would not be suitable.
This model utilises a DC motor, however it has an internal inverter and is therefore compatible with normal AC electrical systems. It cannot be connected directly to a DC power source.
|Style||Modern, Architectural / Designer|
|Location||Indoor, Outdoor - Damp Location (undercover)|
|Blade Span (Size)||52" (132cm)|
|Motor Colour||Textured Bronze|
|IP Rating||No IP Rating Specified|
|Drop (Ceiling to Blade)||Approx 53cm|
|Number of Blades||5|
|Reversible (Summer/Winter)||Reversible From Remote|
|Voltage||240V - Standard|
|Suitability for Raked Ceilings||Suitable up to 30°*|
|Warranty Details||Atlas: This fan comes complete with a 12 month Manufacturer's in-home warranty for defects. See www.atlasfans.com.au/warranties for more details . Conditions apply.|
|Warranty Disclaimer||1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||If you have any questions - please contact us.|