150 Quiet 2 Speed Exhaust Fan - White
The 150 Quiet Exhaust Fan is a high quality, low noise axial wall/ceiling exhaust fan that can be connected to ducting. The fan is IP45 rated, has two selectable speeds and comes with a built in draft stopper. The unit also has built in anti-vibration components.
150 Quiet Features Overview:
|Installation:||Wall / Ceiling|
|Capacity||315 m3/hr (220 on low)|
|Noise:||ONLY 33 dB(A) (28 on low)|
|Wattage:||19 w (17 on low)|
|Ductable:||Yes (150mm duct)|
The 150 Quiet exhaust fan features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust with a capacity of 315 m3/hr.
It can be connected to ducting and has a small built in backdraft shutter. It is available in white only.
This 150 Quiet range has an axial motor, therefore any ducting is recommended to be as short and direct as possible. Ideally you would only use 1-2m of flexible ducting with these fans. For more information please refer to the pressure curve.
This fan comes ready to be hard wired to a switch. A lead and plug may be added by the installer for connection to a power socket.
|Installation Location||Wall or Ceiling|
|Installation||Requires Hardwiring (electrician required)|
|Rec Room Size (m3)||21|
|Built in Draft Stopper||Yes|
|Warranty||Fanco: The Manufacturer offers a 2 year replacement warranty (conditions apply)|
|Disclaimer||*"Recommended room size" figures are based on achieving 15 air changes per hour. Generally this is sufficient, however it does not constitute specific advice. All products that require hardwiring will need to be installed by a licensed electrician.|