Sale Atlas Irene-3 DC Ceiling Fan - Brushed Nickel 52"

Atlas Irene-3 DC Ceiling Fan - Brushed Nickel 52"

Pre-Order $535.00 $529.00
Brand



CUSTOMER NOTICE: This fan is available to purchase on PRE-ORDER. ETA early March. Any orders placed will be dispatched when in stock.

This fan is suitable for ceilings which are 2.7m or higher as it drops approx 53cm from ceiling to blade.
The Atlas Irene-3 ceiling fan is a modern 6 speed fan with a diameter of 52" made of the finest aluminium and stamped steel. The Irene 3 has a rustic style design with an energy efficient 31.5watt DC motor and solid walnut wooden blades. The fan comes with a hand-held remote control. This fan is 'damp rated' which means it can be installed outdoors in a covered location.


Irene-3 Features Overview:

Location:Indoor/Outdoor*
Motor Colour:Brushed Nickel
Blade Colour:Walnut
Blade Material:Timber
Blade Span (Diameter):52" (132cm)
Operation:Remote Control
Summer/Winter Use:Reversible From Remote

 

Be the first to review this product

Product Code: CFATIR3BN

Details

Please bear in mind that the Irene 3 has a drop from ceiling to blade of approx 53cm. For this reason the fan is only suitable for ceilings 2.7m and above.

  • 52" (132cm) diameter with three solid wood, walnut-stained machine-cut blades.
  • Available in the following damped location finishes: brushed nickel, polished chrome or textured bronze.
  • Constructed of cast aluminium and heavy stamped steel.
  • Energy efficient, ultra-quiet 31.5 watt DC motor.
  • Compatible with flat or vaulted ceilings up to 30 degrees.
  • 6-speed remote control with reverse functionality.

The Irene is a damp rated fan with wooden blades. These blades can be used in a damp environment unlike other wooden blades because they are solid stained wood with a sealer on them. Typically other wooden blades that are either plywood or mdf would not be suitable.


Additional Information

Model Number IR3-BN
Motor (Current) DC
Brand Atlas
Style Modern, Architectural / Designer
Location Indoor, Outdoor - Damp Location (undercover)
Blade Span (Size) 52" (132cm)
Motor Colour Brushed Nickel
Blade Colour Walnut
Blade Material Timber
Blade Pitch 15°
Drop (Ceiling to Blade) Approx 53cm
Number of Blades 3
Airflow (Max) 10,979m3/hr
RPM (High) 204
RPM (Low) 50
Motor (max) 31.5w
Reversible (Summer/Winter) Reversible From Remote
Speeds 6 speeds
Voltage 240V - Standard
Suitability for Raked Ceilings Suitable up to 30°*
Warranty Details Atlas: This fan comes complete with a 12 month Manufacturer's in-home warranty for defects. See www.atlasfans.com.au/warranties for more details . Conditions apply.
Warranty Disclaimer 1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --
Installation Disclaimer 1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --

The products listed below are compatible accessories for this item:


Write Your Own Review

You're reviewing: Atlas Irene-3 DC Ceiling Fan - Brushed Nickel 52"

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value For Money
Performance

Accessories

Atlas Extension Rod - 76cm (Brushed Nickel)

Atlas Extension Rod - 76cm (Brushed Nickel)

$45.00
Atlas Extension Rod - 183cm (Brushed Nickel)

Atlas Extension Rod - 183cm (Brushed Nickel)

$89.00