This Aeratron ceiling fan model is light adaptable.
Raked / High Ceiling Installation
If you have a raked ceiling 20 degrees and below: Purchase the extension rod kit (see below)
If you have a raked ceiling 21 degrees and over: Purchase the extension rod kit & raked ceiling kit (see below)
If you have a flat, high ceiling and simply wish to extend the drop of the fan then you would just need to purchase the extension rod kit.
The raked ceiling kit and extension rod are listed as accessories below, please click on each item to read more about them.Please note this ceiling fan is suitable for INDOOR installation ONLY. If installed in an outdoor location, your Aeratron ceiling fan will not be covered by the manufacturer warranty.
|Style||Modern, Architectural / Designer|
|Blade Span (Size)||50" (127cm)|
|IP Rating||No IP Rating Specified|
|Light Kit||Light Adaptable|
|Drop (Ceiling to Blade)||298mm|
|Number of Blades||3|
|Reversible (Summer/Winter)||Reversible From Remote|
|Voltage||240V - Standard|
|Warranty Details||Aeratron: This fan comes complete with a 3 year Manufacturer's warranty on the motor and other main parts. A 1 year warranty is provided for the receiver and remote control. Valid for Australia installations only. Conditions apply.|
|Warranty Disclaimer||1. Ensure installation takes place by a licensed and qualified electrician unless otherwise stated. Proof is often required upon requesting a warranty - this proof will need to be in the form of an invoice or receipt detailing the name and licence. --, 2. Never take down your fan if there is a fault before contacting the warranty line. Most warranties are in-home therefore will only take effect on installed fans unless otherwise instructed. --, 3. You must maintain your ceiling fan to prevent corrosion damage to the finishes. A lack of maintenance causing damage is not covered by warranty. See your fan instructions for care / maintenance instructions. --|
|Installation Disclaimer||1. All electrical goods require installation from a licensed electrician. Please wait for your goods to arrive before booking your electrician. It is important that you keep your electrician's certificate of installation in a safe place. --, 2. Ceiling fans should be installed so you have a minimum of 2.1m from blade to floor, however please check with your local council regulations and electrician to assess your individual needs. --|
|Notice / Disclaimer||Aeratron: it is highly recommend to install a maximum of 8 fan units per power circuit, and highly recommend to add an on/off switch to each fan. This will allow extra energy savings and easier servicing if required.|
The products listed below are compatible accessories for this item: